GENERAL TERMS AND CONDITIONS
                           (Continued)
   
               (1)  At intervals of not more than six Months, by
     means of an instrument of standard manufacture accepted in
     the industry for this purpose using a sample of Gas from the
     Gas stream at the point of receipt and delivery.
   
               (2)  By means of an instrument of standard
     manufacture accepted in the industry for this purpose
     installed at a point to measure the specific gravity of the
     Gas stream from which Gas is being delivered at the point of
     receipt and delivery.
   
          14.5 The compressibility ratio factor(s) used in
     computing the volume of Gas delivered through a turbine
     meter or a positive displacement meter shall be determined
     by the equation s = (Fpv)2, in which "Fpv" is the
     supercompressibility factor determined as described in
     Paragraph 14.3(4) above.
   
          14.6 In determining the flowing temperature factor,
     supercompressibility factor and compressibility ratio
     factor(s) for use in computing the volume of Gas delivered
     through a meter, the flowing Gas temperature for only the
     period(s) of time that Gas was flowing through the meter
     shall be used.
   
          14.7 All flow, measuring, testing and related equipment
     shall be of standard manufacture and type approved by Clear
     Creek.  If applicable, Clear Creek or Customer may install
     check measuring equipment, provided that installation of
     such equipment does not interfere with the operations of the
     Operator.  Clear Creek, or Customer, in the presence of the
     other party, shall have access to measuring equipment at all
     reasonable times, but the reading, calibrating and adjusting
     thereof and the changing of charts, if any, shall be done by
     the Operator.  Clear Creek or Customer shall have the right
     to be present at the time of the installing, reading,
     cleaning, changing, repairing, inspecting, testing,
     calibrating or adjusting done by the Operator of the
     measuring equipment.  The records from the measuring
     equipment shall remain the property of the Operator, but
     upon request, the other party may request records, including
     charts, if any, together with calculations therefrom for
     inspection, subject to return within 30 Days after receipt
     thereof.
   
         Reasonable care shall be exercised in the installation,
     maintenance and operation of the measuring equipment to